See-flow 3100 edrco sight flow indicators

1 minute, 59 seconds Read

Erdrco See-Flo® sight flow indicators show you at a glance, the color, clarity, and flow of liquids in process lines. The large tempered glass window permits easy observation of fluid conditions and vane indicator position. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the window is easily removed and replaced. As this is a sight flow indicator, it does not include a calibrated scale.

Features

  • Observe fluid conditions for color, clarity, and flow.
  • Repeatable vane indication-same position at the same flow rate.
  • This enables the user to mark a normal condition on the ledge below the pointer.
  • Use in horizontal or vertical piping systems.
  • Low-pressure loss.
  • Simple design with few parts for long service life.

Principle of Operation

See-Flo® sight flow indicators utilize variable area body housings. The internal volume of the housing enlarges from the inlet to the outlet. The primary element is a tempered alloy vane with one end affixed to the apex of the meter housing. As the flow rate changes, the vane is flexed in direct proportion.

1/2“,3/4“, and 1” connections typically have female threaded ends. Sizes from 11/4” through 6″ utilize an integral bypass housing permitting larger connection sizes in the format of a spool with a consistent 12″ end to end dimension. In addition, it permits a wide variety of connection types which include threaded, flanged, grooved ends and tri-clamp.

Specification

Materials of Construction: (wetted parts)

Housing: aluminum, brass or 316 stainless steel
Shunt: housing material or carbon steel
Window: tempered glass Vane: 17-7 ph stainless steel
“O” Rings: buna-n, ethylene propylene, Viton® or perfluoroelastomer M Piping

Connections:

  • 1/2” to 1″ NPT Female
  • 1/4” to 4″ NPT Male
  • 1/2” to 3″ Tri-clamp
  • 1/4” to 6″ Grooved
  • 1/4” to 6″ Beveled
  • 1/2” to 6″ 150#/300# RF/FF ANSI Flanges (carbon stl)
  • 1/2” to 6″ 150# RF ANSI Flanges (stainless steel)
  • 1/2” to 6″ 150#/300# RF ANSI Flanges (aluminum)
  • 1/2” to 6″ 150# FF ANSI Flanges (brass)
  • 15 to 25 mm DIN 2999/BS21/ISO R7 Female threaded
  • 15 to 150 mm DIN PN 10 Flanges (316 stainless stl & carbon stl)

Pressure Limits:

200 psig (13.8 bar) with glass window 100 psig (6.8 bar) with polycarbonate window

Temperature Limits:

  • -23 to 85°C (-10 to 185°F) with a polycarbonate window.
  • -23 to 121° C (-10 to 250°F) with buna-n o-ring.
  • -23 to 121°C (-10 to 250 °F) with Viton®, ethylene propylene

For more information please click Erdco

  Another Article:The Technology of Ultrasonic FlowmeterWorking Principle of Flow MeterHow to Choose a Flow MeterModels and Types of Flow MeterSound Velocity of MaterialPrinciple Working of Coriolis Mass Flow Meter

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *