Flow control berguna untuk pengontrolan dan pengaturan volume oli yang mengalir masuk dan keluar sirkuit dengan tingkat lebih rendah dari aliran output pompa. Pengontrolan aliran pada sirkuit hidrolik dapat dicapai dengan beberapa cara. Baca Juga : Komponen Sitem Hidrolik pada Industri Cara yang paling umum mengontrol aliran adalah dengan memasang orifice. Saat orifice terpasang, maka […]
Chalwyn MPX CE236 Pressure to Close Butterfly Valve with Manual Close is designed to mechanically latch in the open position for the diesel engine to run. In the event of an engine overspeed condition, direct pneumatic pressure is applied to release the latching mechanism and allow positive spring action to close the valve. The valve […]
Valve 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant […]
The servo-assisted solenoid valve with servo diaphragm is normally closed (NC). In this condition, pressure builds up above the diaphragm – the valve holds tight. When energized, the space above the servo diaphragm is pressure relieved and lifted up by the medium – the valve opens. The modular extendable valve system can be built up […]