Bmeters RFM-TXE Wireless M-BUS module for pulse output meters

Diposkan pada oleh Rudy Wiratama
RFM-TXE Wireless M-BUS module for pulse output meters

B METERS is an Italian company that has been designing, producing and distributing instruments and solutions for measuring the consumption of water and energy used for heating and cooling, for over 25 years. The yearly production currently exceeds 1,800,000 units putting B METERS in a leading position both at national and European level. B METERS … Lanjutkan membaca Bmeters RFM-TXE Wireless M-BUS module for pulse output meters

Programmable display unit PDU–420–W, Dinel-Level and Flow Measurement

Diposkan pada oleh Rudy Wiratama
programmable display unit PDU–420–W

programmable display unit PDU–420–W The PDU-4x0-W meter is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be … Lanjutkan membaca Programmable display unit PDU–420–W, Dinel-Level and Flow Measurement

Local Process Indicator LDU–401, Dinel-Level and Flow Measurement

Diposkan pada oleh Rudy Wiratama
LOCAL PROCESS INDICATOR LDU-401

LOCAL PROCESS INDICATOR LDU-401 LDU–401 process indicator is fit for all level meters with 4 ... 20 mA with 2-wire technique. Customers can use the two buttons to program the zero point, span, decimal point, damping and alarm point, etc. Over or under range are displayed as a message. The integrated smart diagnostic system continuously … Lanjutkan membaca Local Process Indicator LDU–401, Dinel-Level and Flow Measurement

Multifunction graphical unit MGU–800, Dinel-Level and Flow Measurement

Diposkan pada oleh Rudy Wiratama
MULTIFUNCTION GRAPHICAL UNIT MGU-800

MULTIFUNCTION GRAPHICAL UNIT MGU-800 The MGU–800 is a sophisticated multichannel unit that allows simultaneous measurement, visualization, and control of numerous channels. This device can operate autonomously or with cooperation with external measurement devices and actuators. MGU–800 is designed as a modular device consisting of a base and optional input and output modules.The MGU–800 displays all … Lanjutkan membaca Multifunction graphical unit MGU–800, Dinel-Level and Flow Measurement

Programmable Control Unit PCU–100, Dinel-Level and Flow Measurement

Diposkan pada oleh Rudy Wiratama
PROGRAMMABLE CONTROL UNIT PCU–100

PROGRAMMABLE CONTROL UNIT PCU–100 Programmable control unit PCU–100 is used for measurement, displaying, and archiving of the physical value (liquid level, pressure, flow, temperature, etc.). One transducer of physical magnitude with an analog 4-20 mA output can be connected to the unit. Different types of conversion (converting) characteristics (linear, square, root, and user-defined), may be … Lanjutkan membaca Programmable Control Unit PCU–100, Dinel-Level and Flow Measurement

programmable display unit PDU–401–P, Dinel-Level and Flow Measurement

Diposkan pada oleh Rudy Wiratama
programmable display unit PDU–401–P

programmable display unit PDU–401–P The PDU-401-P meter is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be … Lanjutkan membaca programmable display unit PDU–401–P, Dinel-Level and Flow Measurement