Metallic Flow Controller BR
Metallic Flow Controller BR

Bamo Metallic Flow Controller BR

1 minute, 58 seconds Read

Since 1990, new developments in the Level Measure have given a new spring in export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company sells some products. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

The BR series controls the flow rate in a vertical pipe with the ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

The setting of the trigger point is possible over the entire measuring range. The actual flow rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.


  • Vertical mounting
  • 1 adjustable contact
  • Material: stainless steel or brass
  • Pressure limit: up to 300 bar
  • Flow ranges within 0.1 … 50 l/min


Control of flow in cooling, lubricating piping systems, or in any compatible skids.


Temperature limits -20 … +100 °C (On request: 160 °C)
Flow Ranges l/min (of water at 20 °C)
Accuracy ±5%F.S.
Contact type N.O. (without flow)
Protection Contact: IP 65
Connection DIN 43650 plug-in socket, cable gland PE 9
Brass version  
Pressure limit 200 bar
Body Nickel-plated brass
Fittings Nickel-plated brass
Diver Nickel-plated brass
Seals NBR (On request: FPM or EPDM)
Stainless steel version  
Pressure limit 300 bar
Body AISI 316 Ti (1.4571)
Fittings AISI 316 Ti (1.4571)
Diver AISI 316 Ti (1.4571)
Seals FPM (On request: NBR or EPDM)


Read More Articles: 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *