Cylinder unit | cylinder hydraulic | cylinder pneumatic
Hydraulic cylinders dengan style tie rod menggunakan high strength threaded steel rods untuk menahan kedua ujung end caps ke cylinder barrel. Produk ini dapat anyak ditemukan di pabrik industri terapan. Bore cylinders berukuran kecil, biasanya memiliki 4 tie rod, sedangkan bore cylinders berukuran besar dapat memiliki sebanyak 16 sampai 20 tie rod untuk menjaga end caps yang dalam kondisi dibawah tenaga besar yang dihasilkan.
Tie rod style cylinders dapat di dibongkar secara keseluruhan ketika perawatan atau perbaikan, namun mereka tidak selalu dapat disesuaikan. National Fluid Power Association (NFPA) telah menetapkan standar dimensi dari hydraulic tie rod cylinders. Ini membuat silinder dari berbagai macam produsen dapat ditukar-tukar pada mounting yang sama.
Specification
| Bore (mm) | 32 • 40 • 50 • 63 • 80 • 100 | |
| Fluid | Air | |
| Operating pressure | 0.5~9.9 kgf/cm² | |
| Temperature | -20~+80°C | |
| Piston speed | Max. 1m/s | |
| Stroke (mm) | (1) S 500 : +2.0~0(2) 501 S 1250 : +3.2~0 | |
| Cushion length (mm) | Ø32, Ø40, Ø50, Ø63 | 22 |
| Ø80, Ø100 | 25 |
Theoretical Force
| Bore (mm) | Rod (mm) | Action | Pressed Area (cm²) | Operating pressure (kgf/cm²) | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | ||||
| 32 | 12 | push | 8.04 | 24 | 32 | 40 | 48 | 56 | 64 |
| pull | 6.91 | 21 | 27 | 34 | 41 | 48 | 55 | ||
| 40 | 16 | push | 12.56 | 38 | 50 | 63 | 75 | 88 | 100 |
| pull | 10.56 | 32 | 42 | 53 | 63 | 74 | 84 | ||
| 50 | 20 | push | 19.63 | 59 | 79 | 98 | 118 | 137 | 157 |
| pull | 16.49 | 49 | 66 | 82 | 99 | 115 | 132 | ||
| 63 | 20 | push | 31.16 | 93 | 125 | 156 | 187 | 218 | 249 |
| pull | 28.02 | 84 | 112 | 140 | 168 | 196 | 224 | ||
| 80 | 25 | push | 50.24 | 151 | 201 | 251 | 301 | 352 | 402 |
| pull | 45.34 | 136 | 181 | 227 | 272 | 317 | 363 | ||
| 100 | 25 | push | 78.5 | 236 | 314 | 393 | 471 | 550 | 628 |
| pull | 73.6 | 221 | 294 | 368 | 442 | 515 | 589 |
| Mounting type | Drawing | |
| SD | Standard |  |
| FA (MF1) | Head rectangular flange |  |
| FB (MF2) | Cap rectangular flange |  |
| LB (MS1) | End angle flange |  |
| LA | Floor |  |
| CA | One ears elevis |  |
| CB | Two ears elevis |  |
| CC | Short elevis |  |
| TC (MT4) | Intermediate trunnion |  |
Structure and Parts List
 | ||
| Item | Part name | Qty. |
| 1 | Rod cover | 1 |
| 2 | Head cover | 1 |
| 3 | Alumunium tube | 1 |
| 4 | Piston | 1 |
| 5 | Piston rod | 1 |
| 6 | Pisto rud nut | 1 |
| 7 | Tie rod | 4 |
| 8 | Rod cover tie rod nut | 4 |
| 9 | Head cover tie rod nut | 4 |
| 10 | cushion screw | 2 |
| 11 | Powder brozen bushing | 1 |
| 12 | Piston rod seal | 1 |
| 13 | Cushion seal | 2 |
| 14 | Piston wearing | 1 |
| 15 | Induction magnet | 1 |
| 16 | Piston seal | 1 |
| 17 | Cover O-ring | 2 |
| 18 | Cushion screw O-ring | 2 |
Seal Specifications
| Bore Name | Rod seal | Piston packing | Cushion packing | Cushion O-ring | Cover O-ring | Piston wearing |
| Qty. | 1 | 1 | 2 | 2 | 2 | 1 |
| 32 | PDU12 | APA32 | (PEI160) | SM5 | SM30 | WRP32 |
| 40 | PDU16 | APA40 | DR20 | SM5 | SM40 | WRP40 |
| 50 | PDU20 | APA50 | CTU28 | SM6 | SM50 | WRP50 |
| 63 | PDU20 | APA63 | CTU28 | SM6 | SM63 | WRP63 |
| 80 | PDU25 | APA80 | CTU35 | SM8 | SM80 | WRP80 |
| 100 | PDU25 | APA100 | CTU35 | SM8 | SM100 | WRP100 |
| Sensor Mounting and Aligment | Structure |
 |  |
| Loosen 2 M4 screws on the mounting bracket to move sensor(s) to the position you need.Tie 2 M4 screws to make sure the right position. | Sensor and Bracket |
 |
BracketDrawingCA+CB CB+BK TC+BK Standard stroke Unit: mm | Rod end connectorsDrawingY connector +pin I connector Pin Floating joint(P13.2-P13.3)  Vertical bearing (PHS) (P13.4) Cushion length BoreLength32 • 40 • 50 • 632080 • 10025 |
Visit Wiratama-ma for more info
Cylinder Hydraulic, cylinder unit