Komax large-scale static mixers are designed to be installed in water treatment channels of any cross section including open and closed ducts. Low-pressure drop designs for chlorinating can be supplied as complete assemblies or in component form for on site assembly where access is difficult. For example, a typical unit of this type in a ten foot by ten-foot duct was assembled by the owner in less than eight man hours.
Mixing Efficiency – In Field Testing 98%
Please contact Komax for designs specifications on the channel mixer. Our engineers are prepared to design a complete Motionless Mixer system for your application.
Chlorine Contacting Mixer – City of Denver Colorado WWTP
Flow 165 MGD – Stainless Steel Static Mixer 10′ X 10′ X 35′
Reduced Chlorine Consumption 50% with 100% Energy Savings
Mixing Efficiency – in field testing 0.02 COV.
![IMG_3315- IMG_3315-](https://i0.wp.com/www.komax.com/wp-content/uploads/2019/02/IMG_3315-.jpg?w=820&ssl=1)
For a very slow velocity channel
![channel_mixer_contour channel_mixer_contour](https://i0.wp.com/www.komax.com/wp-content/uploads/2019/03/channel_mixer_contour.png?w=820&ssl=1)