J. Schneider C-TEC 2425 P, Capacitor buffered Power Supply. The DC UPS of the C-TEC 2425 P series is equipped with integrated ultracapacitors for accumulating energy. During normal operation, this capacitor is charged by an internal charger which is supplied by an external, regulated DC power supply. If the DC supply is interrupted, the energy of the ultracapacitors is released in an unregulated process (24,25 to 19 V DC). The load is supplied by the buffer module until the voltage is ≤ 19 V. The buffering time depends on the state of charge of the capacitor and discharging current. As a further function, the C-TEC 2425 P can provide more current for a certain time.
The DC-UPS shows the following features:
- Maintenance-free due to durable ultracapacitors
- reduces wiring time due to integrated energy storage
- Microcontroller-based charging and discharging of the ultracapacitors
- Input voltage signal via potential-free contact and LED
- Short overload possible
- Vibration-secured wiring via spring-loaded plugs
- Wide working temperature range -40°C till 60°C
J. Schneider C-TEC 2425 P Technical Data
| Nominal input voltage | 24 V DC ±10 % |
| Min. nominal input voltage for charging mode | 22 V DC |
| Max. nominal input current | 28 A DC |
| Max. charging current | 3 A DC |
| Nominal output voltage (mains operation) | 24 V DC ±10 % |
| Nominal output voltage (buffer operation) | 24,5 V … 19 V DC ± 2 % |
| Max. nominal output current | 25 A DC |
| Efficiency | > 90 % |
| Parallel connection | No |
| Series connection | No |
| Energy content | 1,2 kJ |
| Buffer time | 47 sec @ 1 A / 1 sec @ 25 A |
| Degree of protection | IP20 |
| Operating temperature | -40 … 60 °C |
| Storage temperature | -40 … 60 °C |
| Relative humidity | 95 % non-condensing |
| Max. altitude (without derating) | 2000 m above sea level |
| Dimensions (H x W x D) | 123 mm x 65 mm x 145 mm |
| Weight | 0,8 kg |
| Fixation | Snap-on mounting for DIN top-hat rail
or mounting bracket for mounting plate |
| Norms and Regulations | EN 50178 / EN 60950
EN 61000-6-4 EN 61000-6-2 EN 60068-2-6 EN 600068-2-27 |
| UL approvals | UL 508
C22.2 |
Source: Indonesia Industrial Parts – Measurement, Equipment, Electrical & Control (inaparts.com)
Download: Datasheet
Other Article:
- J. Schneider C-TEC 2440-4 P
- Fcon CUBE GM-Xα series Touch Panel Gas Mixer with Buffer tank
- J. Schneider C-TEC 2403-1of
- J. Schneider C-TEC 2410 2kJ
- J. Schneider NBBH 2401
- J. Schneider C-TEC 1203
- J. Schneider C-TEC 1225 P
- J. Schneider C-TEC 2403 USB
- Kracht KP 1 Duo Tec – Gear Pump Series
- J. Schneider C-TEC 4815 P
- J. Schneider AC C-TEC 2403-1-400