Power Genex- PG3 Angle Seat Piston Valve

1 minute, 45 seconds Read

Power Genex- PG3 Angle Seat Piston Valve
Angle Valve

Globe Valve Dilengkapi dengan bodi kursi sudut (angle seat) dan sumbat datar (flat plug) dengan segel lembut.

Baca juga: Function and Types of Control Valve


  • Spring return closed or open, double-acting.
  • Stainless steel valve body standart (SS316).
  • High flow rate.
  • Optical visual indication.
  • Low control air consumption due to minimized volume in the actuator.
  • Optional mechanical switches, proximtiy sensors, solenoid valve, valve positioner, stroke limiter and manual override device.
  • Propotional plug on request.


WaterNeutral gases
Steam up to 180ºCTextile dyeing and drying
OilsInk and paint dispensing
Corrosive media 


Valve Body

SizeDN15, DN20, DN25, DN32, DN40, DN50
End ConnectionFemale thread, socket welding
Nominal PressurePN16
Wetted MaterialBodyStainless steel 316
Plug&SteamStainless steel 316
Plug SealingPTFE
Leakage ClassANSI Class VI
Media ViscosityMax. 600 mm²/s
Fluid Temperature-10ºC +180ºC (Steam up to +180ºC)


TypePneumatic piston actuator
Normally closed, normally open, double-acting
Size50mm, 63mm, 80mm, 100mm
MaterialPA, PPS
Piston Seal MaterialViton
Pilot PortPF (G) 1/4
Control MediaAir, natural gas
Control Pressure4 10 bar
Ambient Temp.PA : -10 C +60 C
PPS : +5 C +130 C

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *