Xonic 10G Ultrasonic Gas Flow Meter
Xonic-10G Ultrasonic Flowmeter uses Ultrasonic Transit-Time Technology, it shows superior performance than the existing pressure gas flow meter. Depends on pipe diameter size, it uses one path or three paths ultrasonic sensor(s), and the temperature sensor is embedded to give compensation volume. Xonic-10G is developed as the first ultrasonic type gas flow meter in Korea.
Characteristic
- 01 m/s Measuring low flow rates
- Wide measuring range 200:1
- No moving parts
- pressure loss control
- Easy installation and maintenance
- 2 Cross paths measurement
- Temperature sensor, and the volume compensation
Application
- Natural Gas
- Flare Gas
- COG Gas
- Bio Gas
- Vapor Gas
- Fuel Gas
- Vent Gas
Field of Application
- Natural Gas Flowmeter
- AIR Supply Lines
- Combustion Gas
- Tunnel Air Flow Control
Baca Juga :
| General Specification | ||
| Measurement method | ultrasonic transit-time difference | |
| Velocity Measurement | -30 m/s ~ 30 m/sec | |
| Minimum Velocity | 0.01 m/s | |
| Display | Flow (Instant Flow, standard, mass), Total Flow, Velocity | |
| Accuracy (Reading) | 0.5% | |
| Reproducibility | 0.25% | |
| Diagnostic Function | the shape of the ultrasonic signal, value gain, ΔT, FFT | |
| Measuring Gas Type | natural gas, gas, AIR, combustion gas | |
| Converter | ||
| Temperature | -20 ~ +60℃ | |
| Explosion Proof | IECEx | Ex d II C |
| In / Output | Relays | Normally open |
| Analog Cut | 4-20mA | |
| Analog In | 4-20mA | |
| Communication | RS-232C, RS-485 MobBus | |
| Power | 12~24VDC | |
| Flange / Transducer | ||
| Flange Range | 50 ~ 300mm flange type | |
| Material | Stainless 304 | |
| Temperature | -20 ~ +80℃ | |
| Working Pressure | 20 bar below | |
| Temperature Sensor | 500Ω 4 wire, -40 ~ +120℃ |