J. Schneider CEM 12-1, Capacitor Extension Module. The CEM module is used to increase the buffer energy for the devices C–TEC 1203 and AC C–TEC 1203-05.
The C–TEC monitors and controls the charging and discharging of the extension modules.
J. Schneider CEM 12-1 Technical Data
| Nominal input voltage | 12 V DC |
| Input voltage range | 0… 13,2 V DC0… 12 V DC +10% |
| Buffer capacity | 1 kJ |
| Nominal input current | 3 A DC |
| Nominal output current | 3 A DC |
| Fusing input | 3 A T (PTC internal) |
| Fusing DC output circuit | 3 A T (PTC internal) |
| Type of connection input ,C+/C-‘ | Spring terminal max. 1,0mm² |
| Type of connection output ,C+/C-‘ | Spring terminal max. 1,0mm² |
| Protective system | IP 20 and EN 60529 |
| Storage temperature | – 40… 60 °C |
| Environmental temperature | – 40… 60 °C |
| Relative humidity | 95 % non-condensing |
| Max. mounting height (without load reduction) | 2000 m above sealevel |
| Dimensions (H x W x D) | 92,5 mm x 60 mm x 116 mm |
| Weight | 0,52 kg |
| Fixation | Snap-on mounting for DIN top hat rail |
| Norms and Regulations | EN 50178 / EN 60950 |
| UL approvals | No |
Reference :inaparts.com| j-schneider.de
Download : Datasheet
Other Article:
- J. Schneider C-TEC 2440-4 P
- Kracht DT 5 Duo Tec Series – Gear Pump
- J. Schneider NBBH 2401
- J. Schneider C-TEC 1203
- J. Schneider C-TEC 1225 P
- BHV Senszory Pressure Gauge Devices and Systems
- Kracht KP 1 Duo Tec – Gear Pump Series
- J. Schneider C-TEC 2403-1of
- J. Schneider C-TEC 4815 P
- J. Schneider AC C-TEC 2403-1-400