Schneider RM35TF30 Relay Fase Multifungsi

1 minute, 55 seconds Read
Schneider phase control relay RM35TF30

Relay control fase multifungsi RM35-T

RM35TF termasuk dalan kategori zelio control relay dengan multifungsi yang digunakan untuk mendeteksi kegagalan fase, melihat overvolatge & undervoltage, Asimetri, dan urutan fase.


tipe produk/componentPengukuran modular dan kontrol relay
tipe relayrelay fase multifungsi
Detail aplikasi produkUntuk pasokan 3 fase
time delayDisesuaikan 0.1…10 s, +/- 10 % dari nilai skala penuh
kapasitas swicthing dalam VA1250 VA
rentang pengukuran208…480 V voltage AC
reset time<= 1500 ms for at 480 V
maximum switching voltage250 V AC
250 V DC
minimum switching current10 mA at 5 V DC
maximum switching current5 A AC
5 A DC
supply voltage limits194…528 V AC, 3 phases
batas control circuit voltage– 12 % + 10 % Un
komsumdi daya VA0…22 VA at 400 V AC 50 Hz
voltage detection threshold< 194 V
control circuit frequency50…60 Hz +/- 10 %
output contacts2 C/O
nominal output current5 A
measurement voltage limits176…528 V AC
hysteresis2 %
delay at power-up<= 650 ms
measuring cycle<= 140 ms measurement cycle as true rms value
threshold adjustment voltage+2…+10 % in the range 480 V AC
-12…-2 % in the range 220 V AC
2…20 % of Unselected
-20…-2 % in the range 380…480 V AC
+2…+20 % in the range 220…440 V AC
voltage range220…480 V phase to phase
adjustment of asymmetry threshold5…15 % of Unselected
repeat accuracy0.3 % for time delay
0.5 % for input and measurement circuit
measurement error< 1 % over the whole range with a voltage variation
0.05 %/°C with temperature variation
response time< 200 ms in the event of a fault
overvoltage categoryIII conforming to IEC 60664-1
insulation resistance> 500 MOhm at 500 V DC conforming to IEC 60255-5
> 500 MOhm at 500 V DC conforming to IEC 60664-1
[Ui] rated insulation voltage400 V conforming to IEC 60664-1
supply frequency50/60 Hz +/- 10 %
operating positionAny position without
connections – terminalsScrew terminals 1 x 0.5…1 x 4 mm² – AWG 20…AWG 11, solid cable without cable end
Screw terminals 2 x 0.5…2 x 2.5 mm² – AWG 20…AWG 14, solid cable without cable end
Screw terminals 1 x 0.2…1 x 2.5 mm² – AWG 24…AWG 12, flexible cable with the cable end
Screw terminals 2 x 0.2…2 x 1.5 mm² – AWG 24…AWG 16, flexible cable with the cable end
tightening torque0.6…1 N.m conforming to IEC 60947-1
housing materialSelf-extinguishing plastic
local signalingLED green for power ON
LED yellow for relay ON
LED yellow for fault
mounting support35 mm symmetrical DIN rail conforming to EN/IEC 60715
electrical durability100000 cycles
mechanical durability<= 30000000 cycles
operating rate<= 360 operations/hour under full load
utilization categoryAC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
safety reliability dataMTTFd = 399.5 years
B10d = 360000
width35 mm
product weight0.13 kg

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *