Piston Flow Meter MAX P001

1 minute, 5 seconds Read

P001 Piston Flow Meter

PD Flowmeter Piston series MAX P001

P001 Series Piston Flow Meter termasuk dalam kategori positive displacement flow meter dengan Piston yang dikeluarkan oleh Max Machinery, Inc. (“MMI”) dari USA.


  • Odorant Injection Measurement
  • Aviation Hydraulic Testing
  • Hot Melt Adhesive Dispensing Applications Measured to a Fraction of a Gram
  • Valve Leak Testing
  • Chemical Additives Injection Measurement
  • Diesel Exhaust Fluid (AdBlue) Measurement
Baca Juga :Jenis Ultrasonic Flow MetersKaliberasi Flow MeterCara Mengoprasuikan Portable Flow MeterAplikasi Flow MeterFungsi Flow MeterFlow Meter Air


Flow Range0.005 to 200 cc/min0 to 0.053 GPM
Accuracy (at 30 cP)± 0.2% of reading over a 200:1 range, or
±2mV (or4μA), whichever is greater
Maximum Operating Pressure7250 psi500 bar
Weight1.1 kg(2.4 lbs)
Recommended Filtration5 micron
Port Size(s)1/4″ or 6mm tube fitting
FluidsMost non-aqueous, hydrocarbon-based liquids
Material Of Construction
ExternalStainless steel, type 316
WettedStainless steel, type 316, 440C; Silicon Nitride; Nickel-based carbide
O-RingsStandard: Viton®
Optional: Perfluoroelastomer


Signal TypeOutputResolution (K-Factor)Std. Temp†High Temp†Ultra Temp
Frequency5 VDC square wave (current sinking available)12,000 pulses/L90°C155°C225°C
Frequency5 VDC quadrature (2-phase)6,000 pulses/L/phase90°C155°C225°C
Analog0-10 VDCUni or Bi-directional90°C155°C225°C
Analog4-20 mAUni or Bi-directional90°C155°C225°C
Compliance:CE Certified, Ex-proof version available with ATEX/IECEx II 2 G Ex db IIB Tx Gb as well as UL, cUL certification for Class 1, Division 1, Groups C and D, Tx. †Maximum temperature rating for ATEX certified transmitters is 75°C Std. Temp and 130°C High Temp.

Typical Pressure Drop Piston Flow Meter

Dimension Piston Flow Meter P001

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *