| Current Consumption [mA] | < 200 mA at 12-30 VDC reflective |
| < 250 mA at 12-30 VDC with backlight | |
| <250 mA at 24 VAC | |
| <50 mA at 115, 230 VAC | |
| <80 mA at 100-240 VAC switching power supply | |
| Power Consumption | < 5 W <8 W |
| Cable Cross-Section | 1…1.5 mm² (0.0015…0.0023 in²) with the multicore cable end |
| Input Resistance | approx. 10 kOhm |
| Pulse Length min. | 17 ms (30 Hz), 8 µs (60 kHz) |
| Supply Voltage | 12-30 VDC |
| 24, 115, 230 VAC | |
| 100-240 VAC | |
| Count Frequency [Hz] | max. 60 kHz (TTL 20 kHz): Single-channel counting and directional input |
| max. 60 kHz (TTL 20 kHz): differential or totalizing operation | |
| channel (A+B together) | |
| max. 30 kHz (TTL 20 kHz): phase discriminator 1- or 2-fold evaluation | |
| max. 15 kHz (TTL 15 kHz): phase discriminator 4-fold evaluation | |
| attenuated 30 Hz | |
| For further details, see the graphic and manual. | |
| Overload Protection | ext. backup |
| DC: 0.16 AT (IEC 127), DC: 0.2 AT (UL 198) | |
| 24 VAC: 315 mAT | |
| 115 VAC: 63 mAT | |
| 230 VAC: 32 mAT | |
| 100-240 VAC 630 mAT | |
| Overload Protection Relay Output | ext. backup 230 V |
| 2.5 A mT | |
| Sensor Supply | transformer power supply: 12-24 VDC (load-dependent) |
| max. 50 mA | |
| switch power supply24 VDC -5% | |
| max. 115 mA, max. capacitative load 470 µF | |
| Storage of Values | NVM> 10 years |
| Electrical Connection | pluggable screw terminals / connecting clamps |
| Amplitude Threshold | < 2 V and > 8 V or < 1 V and> 4 V at TTL levels |
| amplitude max. 40 VDC | |
| Active Edge | programmable, positive with PNP input, negative with NPN input |
| Pulse Shape | any square wave (1:1 for max. frequency) |
| Prescaler | 0.0001 – 99.9999 |
| Set Function | set to VW 0 (independent of resets) |
| Display and Preset Range | – 999 999 to + 999 999 |
| Alarm Signal | display blinks |
| when presets 0,1 or 2 are active | |
| Relay (Preset 1 and 2) | Varistor max. 250 VAC / 30 VDC / 5 A |
| Varistor min. 5 VAC / 5 VDC / 10 mA | |
| Delay < 10 ms | |
| Transistor output (Preset 1 + 2) | DC supply: PNP output 12 – 30 VDC, max. 50 mA |
| transformer performance (24, 115, 230 VAC): PNP output 12 – 24 VDC, max. 30 mA | |
| switch power supply 100-240 VAC: PNP output 24 VDC, max. 50 mA | |
| Application Output | DC supply: PNP output 12 – 30 VDC, max. 20 mA |
| transformer performance (24, 115, 230 VAC): PNP output 12 – 24 VDC, max. 20 mA | |
| switch power supply 100-240 VAC: PNP output 24 VDC, max. 20 mA | |
| Attention | Only for transformers (24, 115, m230 VAC: |
| The energy load on the outputs (sensors 12-24 VDC, out1, out2, Appl.-Outp.) may not be more than 65 mA total. |
Asosiasi UKM Pendukung Industri Bekasi
AUPI Bekasi
Asosiasi UKM Pendukung Industri Bekasi
AUPI Bekasi