Gas Booster Single Stage Double Acting SC Hydraulic Engineering
Gas Booster Single Stage Double Acting SC Hydraulic Engineering

Gas Booster Single Stage Double Acting SC Hydraulic Engineering

3 minutes, 25 seconds Read

SC Hydraulic Engineering GBD Series Gas Booster Single Stage Double Acting is a leading manufacturer and designer of an ever-growing line of high-pressure, air-driven liquid pumps, as well as air and gas boosters that are being used in a variety of industries and applications. Growing since 1953, we offer liquid pressures as high as 65,000 psig and can exceed 17,000 psig in gas pressures.

General Product Information

  • Requires No Lubrication
  • High Flow, Medium Pressure
  • Remote Control Capabilities
  • Oil-free High-Pressure Section
  • Nominal Pressures Up To 12,500 psi
  • Air Operated – Does Not Require Electricity

This series of boosters doubles the volume of output gas per cycle and is a good choice for moving relatively high volumes at pressures up to 20,000 psig. Supply pressure is added to the maximum outlet pressure. The GBD-5 gas booster is a modified version of our popular ABD air booster. It is used to boost gas pressures up to 1,500 psig. The booster is able to move large volumes of gas efficiently when lower pressures are suitable.

Application

  • Laser Cutting
  • Leak Detection
  • Pressure Testing Vessels
  • Low-Pressure Gas Recovery
  • Charging Of Nitrogen Bottles
  • Gas Assisted Injection Molding
  • Aircraft Slide Chute Gas Storage
  • Charging Of Nitrogen Accumulators
  • Transfer Of Sf6 For Arc Suppression
  • Transfer Of Sf6 For Circuit Breaker Insulation
  • Boosting Pressure From Nitrogen Generators

Gas Booster Single Stage Double Acting SC Hydraulic Engineering Dimensions

Model No. Maximum Material Maximum Material An Inlet Port Static Outlet Minimum Inlet Displacement
Rated Gas Supply Rated Gas Outlet B Outlet Port Stall Pressure Gas Pressure (Ps) Per Stroke
Pressure (Ps) Pressure (Po) (in3 per cycle)
GBD-5 1500 psig 1500 1/2″ NPT 4.7 Pa +Ps 25 psig 28.02.00
103 bar 103 bar 1/2″ NPT
GBD-15 5,000 psig 5,000 psig 1/4″ NPT 15 Pa + Ps 50 psi (3.5 bar) 14.01
345 bar 345 bar 1/4″ NPT
GBD-30 6,000 psig 9,000 psig 1/4″ NPT 30 Pa + Ps 100 psig (7 bar) 06.03
410 bar 620 bar 1/4″ NPT
GBD-75 6,000 psig 20,000 psig 9/16″-18 (1) 75 Pa + Ps 250 psig (17 bar) 02.04
410 bar 1,380 bar 9/16″-18 (1)
  1. Coned and threaded high-pressure connection for 1/4″ O.D. tubing.
  2. Maximum allowed working pressure for oxygen service boosters: 5,000 psi max.
  3. Maximum allowed working pressure for hydrogen service boosters: 6,000 psi max.
  4. Oxygen & hydrogen service boosters are not available on all models. Contact the factory for more information.

Refer to the corresponding gas booster performance curve for operating pressures. Maximum material-rated outlet pressures can be reached under special operating conditions. Do not use air drive and/or gas supply pressures that equate to higher outlet pressures than those “maximum material rated outlet pressures” shown in the table. Refer to the Static Outlet Stall Pressure formula shown in the table (for example, for gas booster model GBD-30 the formula is: Static Outlet Stall Pressure = 30*Pa+Ps). Maximum recommended air drive operating pressure: 100 psi. Maximum-rated air drive pressure: 150 psi (only for static outlet stall pressure).

Ordering

SC Hydraulic Engineering Gas Booster order
SC Hydraulic Engineering Gas Booster order

 

Gas Booster Series (1)

  • GBD: Single Stage Double Acting

Modification

  • No Modification
  • M401: No Inlet / No Outlet Plumbing (2)
  • M402: Remote Pilot
  • M403: Plumbing for Single Inlet / Outlet

Cylinder Modification

  • 5: GB
  • 15: GB
  • 30: GB
  • 75: GB

Pressure Ratio Second Stage

  • N/A on GBD Series

Service Option

  • Standard
  • Oxygen Service (3)
  • Hydrogen Service (3)

Notes:

  1. Do not fill the gap on a two-digit description
  2. Available on GBD-5 only
  3. Not available on GBD-D75, GBT-D15/75 and GBT-D30/75 models. Contact the factory for more information.

Gas Booster Single Stage Double Acting SC Hydraulic Engineering Modification

M014 – Counter Port: This option provides a 5/8-18-UNF thread port on the air motor section of the pump for installing a mechanical cycle counter.

M402 – Remote Pilot: This option provides a 1/8” NPT female port for remotely controlling the start/stop of the pump by connecting an external air signal to actuate the air cycling valve.

Performance Chart

Gas Booster Single Stage Double Acting SC Hydraulic Engineering
Gas Booster Single Stage Double Acting SC Hydraulic Engineering

Read more :

Source: Indonesia Industrial Parts – Measurement, Equipment, Electrical & Control (inaparts.com)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *