SPESIFICATION :
- STYLE: Remote Insertion Mass Flow Meter
- SENSOR: Two reference grade platinum RTD clad in 316SS sheath
- MATERIAL: Wetted metal components: 316SS
- POWER: 24VDC Standard (12VDC or 115/230VAC optional)
- POWER DISSIPATION: <2.5 W
- ELECTRONICS: Remote-Style Microprocessor based (Hybrid-Digital)
- PROBE ENCLOSURE: Junction Box is Explosion Proof, Class I, Div 2, Groups B, C, D (no electronics)
- TRANSMITTER ENCLOSURE: Remote mount, NEMA 4 enclosure
- DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
- TURNDOWN: 100 to 1
- RESOLUTION: 1000 to 1
- LOW END SENSITIVITY: 5 SFPM
- FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation (milli-watts)
- COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
- APPROVALS: CSA C22.2 (24 VDC); ULI604, Class I, Div 2, Groups B, C, D T4 (24VDC); CE (AC Power or 24VDC)
- FIELD RECONFIGURABLE: Sage ADDRESSER required
- FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
- FLOW REPEATABILITY: 0.2%
- RESPONSE TIME: 1 second time constant
- GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
- GAS PRESSURE: 500 PSIG (If higher pressure needed, contact Sage)
- FLOW OUTPUT: 4 to 20 mA for Rate
- TOTALIZER: 24VDC pulse for Totalized value
- TEMPERATURE OUTPUT: Through Modbus® only
- AMBIENT TEMPERATURE: -40°F to 150°F (66°C)
- PROBE STYLE / LENGTH: 1/2″ OD Probe (3/4″ optional) Lengths 6″ to 36″
- RELAYS: N/A
- CABLE LENGTH: 25′ Standard (max length 1000′)
- FLOW CONDITIONING: Captive Flow Conditioners available upon request with meter purchase
- TRANSMITTER ENCL DEPTH: DC: 4.35″ ; AC: 5.35″