Programmable display unit PDU–420–W, Dinel-Level and Flow Measurement

programmable display unit PDU–420–W

programmable display unit PDU–420–W The PDU-4x0-W meter is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be … Lanjutkan membaca Programmable display unit PDU–420–W, Dinel-Level and Flow Measurement

Multifunction graphical unit MGU–800, Dinel-Level and Flow Measurement

MULTIFUNCTION GRAPHICAL UNIT MGU-800

MULTIFUNCTION GRAPHICAL UNIT MGU-800 The MGU–800 is a sophisticated multichannel unit that allows simultaneous measurement, visualization, and control of numerous channels. This device can operate autonomously or with cooperation with external measurement devices and actuators. MGU–800 is designed as a modular device consisting of a base and optional input and output modules.The MGU–800 displays all … Lanjutkan membaca Multifunction graphical unit MGU–800, Dinel-Level and Flow Measurement

Programmable Control Unit PCU–100, Dinel-Level and Flow Measurement

PROGRAMMABLE CONTROL UNIT PCU–100

PROGRAMMABLE CONTROL UNIT PCU–100 Programmable control unit PCU–100 is used for measurement, displaying, and archiving of the physical value (liquid level, pressure, flow, temperature, etc.). One transducer of physical magnitude with an analog 4-20 mA output can be connected to the unit. Different types of conversion (converting) characteristics (linear, square, root, and user-defined), may be … Lanjutkan membaca Programmable Control Unit PCU–100, Dinel-Level and Flow Measurement

Level control relay CDSU

Level control relay CDSU

Level control relay CDSU Level control relay CDSU | Dinel-Level and Flow Measurement Level control relay CDSU are dual-channel units designed to evaluate the states of the conductive probes. They include power supply 5 V AC for supplying the probes. The DIP switches enable to select a basic mode (an independent function of two limit … Lanjutkan membaca Level control relay CDSU

Isolating repeater IRU–420

Isolating repeater IRU–420

Isolating repeater IRU–420 Isolating repeater IRU–420 | Dinel-Level and Flow Measurement Isolating repeaters IRU-420 are designed for supply intrinsically safe level meters in explosive areas and for the conversion of input signal 0/4 ÷ 20 mA to an output signal. Galvanic separation of current signal from explosive area to non-explosive area. The housing of units … Lanjutkan membaca Isolating repeater IRU–420

Intrinsically Safe Supply Units, Dinel-Level and Flow Measurement

INTRINSICALLY SAFE SUPPLY UNITS

INTRINSICALLY SAFE SUPPLY UNITS Supply and switching units NxxU are used for energizing of NAMUR output sensors (DLS–27Xi, CPS–24Xi, etc.) located in hazardous explosive areas. Due to the state of the connected sensor, they switch their output changeover relay contact or a transistor switch. Moreover, they can provide a simple 2-state level regulation (pump-up and … Lanjutkan membaca Intrinsically Safe Supply Units, Dinel-Level and Flow Measurement