J. Schneider CEM 12-2
J. Schneider CEM 12-2

J. Schneider CEM 12-2

1 minute, 5 seconds Read

J. Schneider CEM 12-2, Capacitor Extension Module. The CEM module is used to increase the buffer energy for the devices CTEC 1203 and AC CTEC 1203-05.
The CTEC monitors and controls the charging and discharging of the extension modules.

J. Schneider CEM 12-2 Technical Data

Nominal input voltage 12 V DC
Input voltage range 0… 13,2 V DC0… 12 V DC +10%
Buffer capacity 2 kJ
Nominal input current 3 A DC
Nominal output current 3 A DC
Fusing input 3 A T (PTC internal)
Fusing DC output circuit 3 A T (PTC internal)
Type of connection input ,C+/C-‘ Spring terminal max. 1,0mm²
Type of connection output ,C+/C-‘ Spring terminal max. 1,0mm²
Protective system IP 20 and EN 60529
Storage temperature – 40… 60°C
Environmental temperature – 40… 60°C
Relative humidity 95 % non-condensing
Max. mounting height (without load reduction) 2000 m above sealevel
Dimensions (H x W x D) 92,5 mm x 60 mm x 116 mm
Weight 0,65 kg
Fixation Snap-on mounting for DIN top hat rail
Norms and Regulations EN 50178 / EN 60950
UL approvals No

Reference : inaparts.com| j-schneider.de

Download : Datasheet

Other Article:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *