Ametek Solidstate Controls
Ametek Solidstate Controls

Ametek Solidstate Controls

6 minutes, 9 seconds Read

AMETEK Solidstate Controls is a recognized global leader in the manufacturing of industrial power equipment. Solidstate Controls provide the continuity of electrical power to businesses by designing industrial UPS systems, inverters, power conditioners, battery chargers, remote bypass switches and more. Our applications engineers have decades of design experience and customize each power solution to meet our clients’ most stringent requirements.

Ametek products are designed for industrial applications and are built to provide reliability and efficiency in some of the most rugged environments. With over 50,000 installs in 66 countries, AMETEK Solidstate Controls has over 56 years of experience partnering with leading Fortune 500 companies.

AMETEK Solidstate Controls product

UPS (Unit Power Supply)

Ametek Solidstate Controls
Uninterruptible Power Supply

DPP/3DPP

The Digital ProcessPower (DPP) Uninterruptible Power Supply (UPS) system from AMETEK Solidstate Controls is a true on-line, double conversion UPS system that providescontinuous, clean, regulated power for critical AC loads. Designed specifically for process control and industrial applications, the DPP systems utilize state of the art Pulse Width Modulation (PWM) technology. PWM incorporates high power IGBT semiconductors and digital control for enhanced communications, monitoring, control and diagnostics capabilities.

Also essential to the DPP design is the use of fiber optic cables for control and communications; allowing for better isolation and faster, more accurate signals between processors. The DPP system also include an LCD panel and user-friendly touch screen display for the ultimate in user control

3DPP/IEC

The three phase Digital ProcessPower Uninterruptible Power Supply (UPS) system from AMETEK Solidstate Controls is a true on-line, double conversion UPS system that provides continuous, clean, regulated power for critical AC loads and is IEC compliant.

The 3DPP is designed for process control and industrial applications and offers better isolation and faster, more accurate signals between processors.

DSE

The DSE Uninterruptible Power Supply (UPS) system from AMETEK Solidstate Controls combines the best of both worlds:
(1) The reliability and robust design of a Ferroresonant UPS
(2) The digital control and communications typically found only in Pulse Width Modulation products

The DSE is a true on-line, double conversion UPS system that provides continuous, clean, regulated power for critical AC loads. Designed specifically for process control and harsh industrial applications, the DSE combines digital control for enhanced communications, monitoring, control and diagnostics capabilities with proven ferroresonant transformer design. The DSE also includes the LCD panel and user-friendly touch screen display found in our Digital ProcessPower systems for the ultimate in user control.

Inverter

Ametek Solidstate Controls
Power Inverters

DSS

The DSS Inverter from AMETEK Solidstate Controlscombines the best of both worlds:
(1) The reliability and robust design of a Ferroresonant Inverter
(2) The digital control and communications are typically found only in Pulse Width Modulation (PWM) products

The DSS is a true on-line inverter system that provides continuous, clean, regulated power for critical AC loads. Designed specifically for process control and harsh industrial applications, the DSS combines digital control for enhanced communications, monitoring, and diagnostics capabilities with proven ferroresonant transformer design. The DSS also includes the LCD panel and user-friendly touch screen display found in our Digital Process Power systems for the ultimate in user control.

DPI/3DPI

The Digital ProcessPower Inverter (DPI) from AMETEK Solidstate Controls is a true on-line inverter system that provides continuous, clean, regulated power for critical AC loads. Designed specifically for process control and industrial applications, the DPI systems utilize state of the art Pulse Width Modulation (PWM) technology, incorporating high power IGBT semiconductors, and digital control for enhanced communications, monitoring, control, and diagnostics capabilities. Also essential to the DPI design is the use of fiber optic cables for control and communications; allowing for better isolation and faster, more accurate signals between processors. The DPI designs also include an LCD panel and user-friendly touch screen display for the ultimate in user control.

Transformer

Ametek Solidstate Controls
Transformer

DVS

The DVS accommodates wide variations of incoming AC line voltage while regulating and conditioning the AC output to preset limits. Suitable for harsh environments, the robust design utilizes a copper-wound, triple- shielded, low-impedance isolation transformer. The DVS incorporates state-of-the-art microprocessor technology and independent phase regulation engineered to eliminate voltage spikes and sags.

ISN

The ISN Series Ferroresonant regulating transformers are housed in a single system enclosure. These units are designed to accept a widely varying AC input voltage, while simultaneously producing a well regulated, filtered AC output. ISN Series units feature the unique characteristic of being short circuit protected so that overloads and short circuits on the secondary side are not reflected back to the primar.

Battery Monitor

Ametek Solidstate Controls
Battery Monitor

BTECH® S5™

The BTECH S5 Battery Validation System provides the most effective and reliable assurance that your system’s batteries are functioning properly and are ready to perform in the event of a power outage. Unlike traditional periodic discharge testing, the BTECH S5 continuously monitors each individual battery unit.

This gives more time to respond to failing batteries and to schedule the appropriate maintenance – preventing the cost and lost revenue of system downtime caused by a power outage and battery plant failure. The accurate monitoring of BTECH S5 helps ensure that the battery condition is known so timely replacement of a failed battery or battery maintenance can be performed.

Battery Charger

DCR

The DCR from AMETEK Solidstate Controls is a microprocessor- controlled, thyristor-based system designed for high-efficiency conversion of incoming commercial AC power to clean DCpower. It is used for charging batteries while supplying power to continuous DC loads such as inverters.

The rugged solid-state design utilizes SCR phase control to provide regulated, current-limited DC power. The DCR can operate with or without batteries and is intended for use in UPS systems. The DCR can also be used as a stand-alone device for battery-charging-only applications.DCR

  • Latest digital and power electronics technology
  • Reliable industrial design; MTBF >205,000 hours
  • User definable control and alarm set-points
  • Simultaneous voltage and current readings
  • CE safety and EMC standards compliant
  • UL1012 (UL, cUL) Approved
  • Vacuum impregnated magnetics, 200 ̊C
  • Efficiency up to 95%

Fusible Panelboards

Ametek Solidstate Controls
Fusible Panelboards

When fast, reliable short circuit protection is the problem, the line of Fusible Panelboards from AMETEK Solidstate Controls is the right solution.

Fusible Panelboards (FPB) from Solidstate Controls are designed especially for critical power distribution in Uninterruptible Power Supply system and inverter applications. They are the most reliable method to ensure that one faulted circuit will not cause any adverse affects on any other branches.

Ripple Choke Filters

AMETEK Solidstate Controls Ripple Choke Filters are designed to help reduce the AC ripple current kickback that exists in battery chargers, inverters and UPS systems. This will help your batteries last longer, spare sensitive electronics the deterioration an excessive ripple current can cause and reduce electrical noise.

Bypass Switchess

RMBS/RMBS-T

Solidstate Controls RMBS Series, Remote Manual Bypass Switch (RMBS) is a 3-position switch that allows for complete isolation of a UPS or inverter in order to perform routine or emergency maintenance on the equipment. The RMBS-T unit includes an isolation transformer that isolates the bypass supply. Depending on your equipment line up and space constraints, you may consider combining your transformer and RMBS to create an all-in-one, consolidated unit.

The load is temporarily transferred from the inverter (UPS) onto the bypass (alternate) AC power source. This make- before-break switch is designed to transfer between two in-sync sources to enable a zero-break transfer in both directions, so there is no disruption of power to the connected load(s).

Source: Solidstate

Read More Articles :

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *