Bamo Flow Controllers, Metallic CDA

1 minute, 21 seconds Read
Bamo Flow Controllers, Metallic CDA
Bamo Flow Controllers, Metallic CDA

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market. Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Flow Controllers, Metallic CDA | Descriptions

The CDA controls the flow, on a vertical or horizontal pipe, of a liquid free of particles.

Operation

An orifice plate with a magnet is pushed by the fluid to monitor, in a cylindrical tube. A compensating spring insures the equilibrium of plate and allows the mounting in any position. A Reed contact is adjustable all along the scale, its status changes with the passage of the magnet. With these equipment, the CDA operates independently of the pressure, even in low flow rates.

CDA flow controllers must be installed away from any magnetic field. All ferromagnetic parts, must be at a minimum distance of 10 cm.

Features:

• Operates in all positions
• With 1 adjustable contact
• Versions: Stainless steel or brass
• Pressure: Up to 350 bar
• Ranges: between 0.005 …150 l/min

Application:

Read More:https://inaparts.com/flow-measurement/flow-control/flow-controllers-metallic-cda/

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *