Metallic Flow Controller and Indicator BV Series
Metallic Flow Controller and Indicator BV Series

Bamo Metallic Flow Controller and Indicator BV Series

1 minute, 26 seconds Read

Bamo is a company that comes from France. This company sells some products. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Metallic Flow Controller and Indicator BV Series

The BV series controls the flow rate in a vertical pipe with the ascending flow; the Liquid must be free of particles. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

The upper edge of the float indicates the flow rate: 

  • The scale is graduated in l/min of water.
  • The setting of a trigger point is possible over the entire measuring range.
  • The actual flow rate can be greater than the high range without damaging the device (it results in a higher pressure drop).

These controllers must be installed far from any magnetic induction.

Features:

  • Vertical mounting
  • 1 Indicator + 1 adjustable contact
  • Material: stainless steel or brass
  • Pressure limit 10 bar
  • Flow ranges within 0.1 … 50 l/min

Application:

Control and indication of flow rate in pipings (cooling, lubricating, etc.) or in any compatible skids.

Reference: inaparts.com

Read More Articles: 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *