Adjustable Float Switch Reservoir Equipment
- Float switches can be adjusted on site
- Reliable design using reed switches
- 3 lengths available, 500mm, 1000mm and 1500mm
The FL Series is a range of vertically mounted, single float level switches operating on the proven reed switch and magnet principle.
The FL Seriesfloat switch can be tailored by the user for a particular application, by adjusting the length of the float switch tube. It is also possible for the user to select the switching configuration by inverting the float, giving either open on the rise or close on a rising operation.
The unit is supplied partly assembled, with detailed instructions for the user to complete assembly to the specifications of the application and to install the unit.
The FL Series is designed to be adjusted by the user to fit their tank. The unit consists of a stem with the reed switch and float already set in position. The customer can cut the stem to fit their tank, and assemble it to the header.
The unit is then ready to be fitted to the tank. The unit has a factory set “Open On Rise” switching configuration, but this can be changed by reversing the float.
Note: FL Series switches supplied as loose parts so no IP class applies. If assembled correctly by the customer, the IP class is IP67
Specification
Installation
| Mounting: | 1″ BSP threaded Header |
| Gasket: | 2.0 mm thick sealing washer |
| Length: | Adjustable up to 1500m |
| Electrical specification | |
| Supply voltage: | 40 Vac maximum 300 Vdc maximum |
| Switching current: | 0.5 A |
Material specification
| Header | Brass | Stem | Brass | |
| Float | Polypropylene | Gasket | lingerie grade C4324 to BS7531 grade Y |
Other Parameter
| Fluid types | Any liquids compatible with brass and polypropylene |
Ordering Information
| Part number | Supersedes | Description |
| FL050010R | FL-0500-1-0R | 500 mm long float level |
| FL100010R | FL-1000-1-0R | 1000 mm long float level |
| FL150010R | FL-1500-1-0R | 1500 mm long float level |