Baumer FPDK 14P- Retro Photoelectric Sensor

0 minutes, 57 seconds Read
Baumer Retro Reflective PhotoElectric Sensor FPDK 14P

Light sensor and also commonly called Photoelectric Sensor. This sensor uses light-sensitive elements to detect objects and consists of a transmitter/emitter (Light Source) and receiver (receiver).

on retro-reflective sensor type of emitter and receiver sensor is in one device / combined so that it is quite simple, the receiver’s task in the type of through-beam sensor, has been replaced by a reflector, the emitted beam comes out, will be reflected back by the reflector and received by the receiver, so that when the beam emitted does not reach the receiver, then the sensor output will work.

Specification

General

typeretro-reflective sensor
light sourcepulsed red LED
polarization filteryes
alignment / soiled lens indicatorflashing light indicator
light indicatorLED yellow
sensitivity adjustmentno
wavelength660 nm
suppression of reciprocal influenceyes
actual range Sb = 3,2 m
versionsingle-lens optics
nominal range Sn3,8 m
actual range Sb = 7 m
nominal range Sn7,2 m

Electrical

response time / release time< 1 ms
voltage supply range +Vs10 … 30 VDC
current consumption max. (no load)25 mA
current consumption Amp.20 mA
voltage drop Vd< 1,8 VDC
output functionlight / dark operate
output current< 100 mA
short circuit protectionyes
reverse polarity protectionyes

Mechanical

width / diameter14,8 mm
height / length43 mm
depth31 mm
typerectangular
housing materialplastic (ASA, MABS)
front (optics)PMMA

Ambient Conditions

operating temperature-25 … +65 °C
protection classIP 67

Dimension

Dimension FPDK 14P

Connection Diagram

Connection Diagram FPDK 14P

Visit Wiratama for more info 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *