Sick Encoder
Versatile, compact and flexible – Incremental encoder
Incremental encoders generate information about the position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.
DFS60 Inox
High-resolution incremental encoder – durable and programmable
- Housing, flange, and shaft made from stainless steel
- Face mount flange, servo flange, or square flange with solid shaft and blind hollow shaft
- IP 67 enclosure rating
- Resolution up to 65,536 pulses
- Radial cable outlet or M12 male connector
- Electrical interfaces: TTL/RS-422, HTL/Push-Pull, SinCos 1 Vpp
Can be programmed with the PGT-08-S and PGT-10-Pro as an option
DBS50 Core
The MultiFit Incremental Encoder
- Connection with universal cable outlet
- Face mount flange with 8 mm solid shaft
- Face mount flange with 2 mounting hole patterns and servo groove
- Compact housing diameter of 37 mm with compact construction depth, flange diameter 50 mm
- Various electrical interfaces: TTL/RS-422, HTL/push-pull and Open Collector NPN
- Number of lines from 10 to 2,500 possible
- Temperature range: –20 °C… +85 °C
Enclosure rating: IP 65
DBS36 Core
The MultiFit Incremental Encoder
- Connection with universal cable outlet
- Designs with blind hollow shaft or face mount flange with solid shaft
- Face mount flange with 6 mounting hole patterns and servo groove
- Hollow shaft with universal stator coupling
- Compact housing diameter of 37 mm with compact construction depth,
- Electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
- Number of lines: 10 to 2,500
- Temperature range: –20 °C … +85 °C
Enclosure rating: IP 65
BS60 Core
Rugged, versatile incremental encoder for industrial applications
- Face mount and servo flange with various hole patterns
- Hollow shafts up to 5/8 inches in diameter, optionally insulated, front and rear clamping
- Housing diameter 58 mm, compact installation depth
- Number of lines up to 10,000 pulses
- Cable connection, M12, and M23 male connector, radial
TTL/HTL and TTL interfaces with voltage range 4.5 V DC – 30 V DC
DFS60
High-resolution, programmable encoder for sophisticated applications
- Compact installation depth
- High resolution up to 16 bits
- Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
- Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial
- Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push-pull
- Mechanical interfaces: face mount or servo flange, blind or through a hollow shaft
Remote zero set possible
Rugged, high-performance incremental encoder
- Compact housing
- Durable, low-cost design
- Interfaces: Open collector NPN, TTL/RS-422 or HTL/push-pull.
- Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
- Face mount flange with solid shaft
- Housing for simple clamping ring mounting
Any line count possible from 1 to 2,048
DBS60 Inox
Rugged incremental encoder made of stainless steel for challenging application conditions
- Housing, flange, and shaft made from stainless steel
- Enclosure rating IP67 thanks to shaft sealing ring
- Designs with a blind hollow shaft as well as face mount or square flange with solid shaft
- Number of lines of up to 5,000 pulses
- Radial cable connection or M12 male connector
TTL/RS-422 and HTL Push-Pull, universal TTL/HTL interface with 4.5 – 30 VDC
Encoders with a versatile configuration for machine axes applications
- A solid shaft or hollow bore incremental encoder
- DIP switches for configuring resolution, signal output,
- And counting direction
- Universal 4.5 V … 30 V supply
- LEDs that indicate encoder status and output signal
- Rotatable M12 male connector, 4-pin or 8-pin, or universal cable outlet
Optional fault output directly from an encoder
Large hollow shaft encoders for rough environmental conditions
- Incremental encoder Ø 3.5
- Electrical interface
- 5V TTL / RS422
- 8 … 24V TTL / RS422
- 8 … 24V HTL / push-pull
- 8 … 24V Open Collector
- Blind hollow shaft Ø 30 mm, 1”, ½”,5/8”, ¾”, 7/8”
- Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
The number of lines 120 … 16,384
Large hollow shaft encoders for rough environmental conditions
- Incremental encoder Ø 3.5
- Electrical interface
- 5V TTL / RS422
- 8 … 24V TTL / RS422
- 8 … 24V HTL / push-pull
- 8 … 24V Open Collector
- Blind hollow shaft Ø 30 mm, 1”, ½”,5/8”, ¾”, 7/8”
- Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
The number of lines 120 … 16,384
DFS2x
Factory-configured and user-programmable incremental encoders
- Compact 2-inch and 2.5-inch design
- Integer resolutions from 1 to 65,536 pulses per rev
- Compatible with PGT-08-S PC-based programming tool
- Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface
- Flange, hollow shaft, and blind hollow shaft options
M12 connector, MS connector, and flying lead cable connection options