Danfoss PAH Pump For Marine Fire Fighting

1 minute, 22 seconds Read

The Danfoss PAH and PAH F high-pressure pumps are designed for fire fighting purposes with a flow capacity ranging from 14 to 187 l/min (3.7-49.4 gpm). The pumps are optimized for the use of tap water at temperatures from 2 to 50o C and pressures up to 160 barg (2,321 PSIG). The pumps can be used with high-pressure components, valves, nozzles, etc. from the Danfoss product portfolio to form a complete solution with high reliability and long service life.

Detail Product

Gross weight4.88 Kg Net weight4.72 Kg
Ambient temperature [°C] [Max]50 °C Media temperature [°C] [Max]50 °C
Ambient temperature [°C] [Min]0 °C Media temperature [°C] [Min]2 °C
Ambient temperature [°F] [Max]122 °F Media temperature [°F] [Max]122 °F
Ambient temperature [°F] [Min]32 °F Media temperature [°F] [Min]36 °F
Body materialAISI 304 Outlet connection size [in]1/4 in
Country of originDenmark Outlet connection standardBSPP
Displacement [cm³/rev]4 cm3/rev Outlet connection typeThread
Displacement [in³/rev]0.24 in3/rev Outlet pressure [barg] [Max]140 barg
Drain connection size (metric)M6 Outlet pressure [barg] [Min]30 barg
Drain connection standardMetric Outlet pressure [psig] [Max]2030 psig
Drain connection typeThread Outlet pressure [psig] [Min]435 psig
Flow [gpm] [Max]1.67 gal/min Product GroupPump
Flow [gpm] [Min]0.51 gal/min Product namePump for Tap water
Flow [l/min] [Max]6.43 L/min Product typePAH 4
Flow [l/min] [Min]1.95 L/min Seal MaterialNBR
Inlet connection size [in]1/2 in ServiceableYes
Inlet connection standardBSPP Sound pressure level [dB(A)]76 dBA
Inlet connection typeThread Speed continuous[rpm] [Min]700 rpm
Inlet pressure [barg] [Max]4 barg Speed [rpm] [Max]1800 rpm
Inlet pressure [barg] [Min]0 barg Speed [rpm] [Min]700 rpm
Inlet pressure [psig] [Max]58 psig TypePAH
Inlet pressure [psig] [Min]0 psig   

Visit Wiratama-ma for more info

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *