SITRANS FUS060 Siemens Ultrasonic Flow Meter

1 minute, 18 seconds Read

The SITRANS Ultrasonic Flow Meter FUS060 transmitter is engineered for high-performance applications and designed for remote installation in hazardous as well as non-hazardous environments. In addition to the standard outputs, it also offers communication.

siemens Ultrasonic flow meter
siemens ultrasonic gas meter

 

The SITRANS Ultrasonic Flow Meter F US SONO 3100/SITRANS FUS060 flowmeter consists of a sensor and transmitter. For details and information about the transmitter, see SITRANS FUS060

Application

The main application for SITRANS Ultrasonic Flow Meter SONO 3100 in combination with transmitter type FUS060 is to measure volume flow within:

  • Petrochemical industry
  • Power engineering
  • Water and wastewater
  • Oil and liquefied gases

Specification

 Measuring range Qn 28 to 4200 m3/h (depends on size)
 Nominal size From DN 100 to DN 600 (4″ to 24″)
 Accuracy ±0.5% of the flow rate
 Operational pressure Max. 40 bar (Max. 580 psi)
 Operating temperature From -20 to 85 °C (-4 to 185 °F)
 Medium temperature From -20 to 200 °C (-4 to 392 °F)
 Design 2 track (on request up to 4 tracks)
 Material Carbon steel (Stainless steel on request)
 Approval ATEX

Other variants are available on request.

Futures

  • Transducers can be replaced under pressure
  • Measurement of all liquids less than 350 Cst, conductive or non-conductive
  • No pressure drop
  • Reliable and accurate flow measurements
  • Long-time stability
  • On request as special versions:
    • Special sensor material, e.g. Duplex, stainless steel
    • High/low temperature sensor version: +250 °C (+482 °F)/-200 °C (-328 °F) sensors
    • Pressure rating 430 bar (6235 psi)
    • Special sensor sizes down to DN 25
    • 1-path or 4-path sensor technology

Sources: https://w3.siemens.com/

   Other articles :

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *